Цифро Аналоговые Преобразователи (ЦАП) MAX5722AUA+

ЦАП , 12 бит, SPI, 2.7В до 5.5В, µMAX, 8 вывод(-ов)

The MAX5722AUA+ from Maxim Integrated Products is a 12bit, low power, dual, voltage output DAC with serial interface in 8 pin µMAX package. This dual buffered DAC consumes 112µA supply current, DAC outputs employ on-chip precision output amplifiers that swing Rail to Rail® and the reference input accepts a voltage range from 0 to VDD. In power-down, the reference input is high impedance, further reducing system's total power consumption. The on-chip power-on reset (POR) circuit resets DAC outputs to zero and loads output with a 100Kohm resistor to ground. This provides additional safety for applications that drive valves or other transducers that need to be off on power-up. Device is used in automatic tuning, gain and offset adjustment, power amplifier control, process control I/O boards, battery-powered instruments and VCO control.

• Supply voltage range is 2.7V to 5.5V
• Operating temperature range from -40°C to +125°C
• Ultra low power consumption of 135µA at VDD = +5.5V
• 0.3µA power down current
• Safe power-up reset to zero volts at DAC output
• Three software selectable power-down impedances (100Kohm, 1Kohm and Hi-Z)
• Fast 20MHz, 3 wire SPI, QSPI and MICROWIRE compatible serial interface
• Schmitt-triggered logic inputs for direct interfacing to opt couplers
• Maximum INL is ±16LSB and maximum DNL is ±1LSB at monotonic
• Automatic Tuning; Battery-Powered Instruments; Gain and Offset Adjustment; Power Amplifier Control; Process-Control I

• O Boards; VCO Control

Области применения

Обработка Сигнала, Промышленное, Переносные Устройства