Токовые мониторы INA138NA/250G4

Токочувствительный усилитель , 1 Усилитель, 2 мкА, SOT-23, 5 вывод(-ов), -40 °C, 125 °C

The INA138NA/250G4 is a 36V, high-side, Current Output Current Shunt Monitor, laser trimmed for very low offset voltage (50µV), drift (0.5µV/°C) and high common-mode rejection (120dB at G >=100). It operates with power supplies as low as ±2.25V and quiescent current is only 700µA - ideal for battery-operated systems. Internal input protection can withstand up to ±40V without damage. The INA138NA/250G4 is high-side, unipolar, current shunt monitors. Wide input common-mode voltage range, low quiescent current. Input common-mode and power-supply voltages are independent and can range from 2.7 to 36V for the INA138NA/250G4. Quiescent current is only 25µA, which permits connecting the power supply to either side of the current measurement shunt with minimal error. The device converts a differential input voltage to a current output. This current is converted back to a voltage with an external load resistor that sets any gain from 1 to over 100.

• Complete unipolar high-side current measurement circuit
• Wide supply and common-mode range
• Independent supply and input common-mode voltages
• Single resistor gain set
• Low quiescent current of 25µA (typical)
• Green product and no Sb/Br

Области применения

Тестирование и Измерение, Авто, Связь и Сеть, Компьютеры и Периферия, Переносные Устройства, Управление Питанием, Потребительская Электроника Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.