Температурные датчики для монтажа на плате MAX6652AUB+

Датчик температуры (ИС) , мониторинг системы, Цифровой, ± 2°C, -40 °C, 125 °C, µMAX, 10 вывод(-ов)

The MAX6652AUB+ is a temperature sensor and system monitor in 10 pin µMAX package. This system supervisor monitors multiple power supply voltages, including its own and also features an on-board temperature sensor. Voltage & temperature are converted to an 8bit code using an analogue to digital converter (ADC). A multiplexer automatically sequences through voltage & temperature measurements. Digitized signals are then stored in registers and compared to over/under threshold limits programmed over 2-wire serial interface. 3 interrupt modes are available for temperature excursions, default mode, one-time interrupt mode and comparator mode. IC generates a latched interrupt output ALERT (complementary). The 2-wire serial interface accepts both I2C and standard system management bus (SMBus) write byte, read byte, send byte and receive byte commands to program alarm thresholds and to read voltage and temperature data. It is used in workstations, servers, networking and telecommunicat

• Supply voltage range is 2.7V to 5.5V
• Operating temperature range from -40°C to 125°C
• Monitors four voltages (2.5V, 3.3V, 12V, VCC)
• Monitors local temperature, temperature measurement accuracy, ±2°C (TA = +25°C)
• User programmable voltage and temperature thresholds
• Alert function with ability to respond to SMB alert response address
• Line frequency rejection of 60Hz or 50Hz

Области применения

Считывание и Контрольно-измерительная Аппаратура