Преобразователи постоянного тока в постоянный с изоляцией NPH15S2415IC

Isolated Through Hole DC/DC Converter , ITE, 2:1, 15 Вт, 1 Выход, 15.1 В, 1 А

The NPH15S2415IC is an isolated single-output DC/DC Converter combines ease of application with versatility. The pin pattern is based on the popular industry standard, but two additional pins may optionally be fitted to provide a variety of features not commonly found on units of this type. High efficiency enables full rating to be achieved without heat-sinking and a high surge capability will provide for start-up and transient loads, whilst being thermally protected against sustained overload. Overload protection of the constant current type ensures start-up into complex load conditions. It achieves efficient heat transfer and screening. The product range has been recognized by Underwriters Laboratory (UL) to UL 1950 for operational insulation.

• Industry standard pin-out
• Non latching current limit
• Operation to zero load
• Protected against load faults
• Internal over temperature protection
• Uses no electrolytic capacitors
• Up to 2.4W/cm³ power density
• Constant 350kHz frequency
• 1.5kV input to output isolation
• Continuous rating to 30W at 40°C without heat-sink

• 87% Efficiency

Области применения

Обработка Сигнала, Промышленное