Преобразователи постоянного тока в постоянный с изоляцией NPH10S2405IC

Isolated Through Hole DC/DC Converter , ITE, 2:1, 10 Вт, 1 Выход, 5.1 В, 1.96 А

The NPH10S2405IC is an isolated single-output DC/DC Converter combines ease of application with versatility. The pin pattern is based on the popular industry standard, but two additional pins may optionally be fitted to provide a variety of features not commonly found on units of this type. High efficiency enables full rating to be achieved in a small package without heat-sinking. It is thermally protected against sustained overload. The copper case achieves efficient heat transfer and screening. It has been recognized by Underwriters Laboratory (UL) to UL 1950 for operational insulation.

• Industry standard pin-out
• Non latching current limit
• Operation to zero load
• Protected against load faults
• Internal over temperature protection
• Uses no electrolytic capacitors
• Fixed frequency
• No external components required
• Up to 1.5Wcm³ power density
• 12W Surge rating

• 1.5kV Input to output isolation
• Continuous rating to 10W at 72°C without heat-sink
• 83% Efficiency
• 470µF Maximum load capacitance

Области применения

Обработка Сигнала, Промышленное