Оптопары с логическим выводом ACNW3410-500E

Оптопара , 1 канал, Поверхностный Монтаж DIP, 8 вывод(-ов), 5 кВ

The ACNW3410 contains an LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving IGBTs and power MOSFETs used in motor control inverter applications. The 100kV/µs noise immunity prevent erroneous drive in noisy industrial environment. The voltage and high peak output current supplied by this optocoupler make it ideally suited for driving IGBT directly. The ACNW3410 has the highest insulation voltage of Viorm= 1414 Vpeak in the IEC/ EN/DIN EN 60747-5-5.

• 3.0A maximum peak output current
• Rail-to-rail output voltage
• UVLO with Ve reference for negative power supply
• 150ns maximum propagation delay
• 90ns maximum propagation delay difference
• LED current input with hysteresis
• 100kV/µs minimum Common Mode Rejection (CMR) at Vcm = 1500V
• Icc = 5.0mA maximum supply current
• Under Voltage Lock-Out Protection (UVLO) with Hysteresis
• Wide Operating Vcc Range: 15V to 30V

Области применения

Привод Двигателя и Управление, Источники Питания