Микросхемы и комплектующие WC-160

JST, WC Plier Crimping Tool, Обжимные клещи

JST WC-160 Hand Crimping Tool for SVH Crimp TerminalsImportance of a High-Quality CrimpWhen a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakageWC-160 JST Hand Crimping Tool - OverviewFrom JST a durable, reliable and easy to use hand operated crimping tool made from high quality materials. This crimp tool consists of two ergonomically designed handles with a soft grip for comfortable use, a ratchet mechanism, precision ground die assembly, locator and wire stop. The die assembly has three cavities for wire sizes 18 AWG, 20 AWG and 22 AWG. The pre-set load of the tool can be easily adjusted.Ratchet MechanismThe ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial crimps. Once the cycle is complete the handles will re-open. The ratchet also enables the operator to repeatedly produce consistent, high-quality crimps. If jamming or terminal misplacement occurs the handles can be easily opened by pushing a ratchet release leverLocator and Wire StopThis hand crimp tool features a user friendly flap style locator which ensures the terminal is accurately positioned during the crimping process. The locator is simply flipped open allowing the terminal to be inserted into the correct profile. Once the terminal is inserted the locator is flipped back into place and the crimp tool is closed until the first ratchet. The pre-stripped wire is then inserted into the terminal until it butts against the wire stop, the hand tool can then be closed until the ratchet releases. The locator is opened and the full crimped terminal can then be carefully removedKey Features and Benefits• Durable and easy to use• Precision ground dies• Ratchet mechanism ensures full crimp cycle is achieved• Ratchet release latch• Locator and wire stop for accurate terminal positioning• Easy re-adjustment of load• Ergonomically designed soft grip handles for comfortable useQuestions and AnswersWhat Terminals can this Crimping Tool be used with?This hand crimping tool is designed for crimping JST loose piece SVH-21T-P1.1 un-insulated crimp terminals that accept a wire size range from 22 AWG to 18 AWG onto cableJST Hand Crimping Tools