Микросхемы и комплектующие KAS-2-15

Источник питания AC/DC на печатную плату , ITE, 1 Выход, 2 Вт, 15 В, 133 мА

The KAS-2-15 from TDK-Lambda is a KAS series wide AC to DC input PCB mount power supply. This power supply has inrush current limit of 30A/50A (115VAC / 230VAC) and input current of 75mA/55mA (115VAC/230VAC). It features hicc-up mode, automatic recovery overcurrent protection, greater than 15ms hold-up time (115VAC/230VAC) and less than 0.25mA at less than 240VAC leakage current (touch). This PCB mount power supply is approved by UL/CSA/IEC/EN 60950-1 and designed to meet IEC/EN60335-1, CE safety agencies. It is also certification by EN55032 class B conducted and radiated EMI.

• 15V output voltage, 0.133A maximum current, 2W power
• 300mV output ripple and noise, ±750mV line regulation, ±900mV load regulation
• 73% efficiency, 350µF maximum capacitive load
• 90VAC to 305VAC, 47Hz to 63Hz or 120VDC to 430VDC input voltage, friendly environmental footprint
• Class II (no ground needed), low off-load power consumption, easy rapid on-board integration
• ±0.02%/°C temperature coefficient, ±6% voltage set accuracy
• 3KVAC input to output withstand voltage
• No load power consumption is less than 0.3W
• 19.9g weight, 28.5mm x 25.8mm x 17mm size (L x W x H), PC board mountable, resin case (UL 94V-0)
• Operating temperature range from -40°C to +80°C (derate linearly to 40% load from 60°C to 80°C)

Области применения

Промышленное