Микросхемы и комплектующие HIP2210FRTZ-T7A

Gate Driver , 1 канал(-ов), Высокая Сторона и Низкая Сторона, MOSFET, 10 вывод(-ов), DFN

HIP2210 is a 100V, 3A source, 4A sink high-frequency half-bridge NMOS FET driver. The HIP2210 features a tri-level PWM input with programmable dead time. Its wide operating supply range of 6V to 18V and integrated high-side bootstrap diode supports driving the high-side and low-side NMOS in 100V half-bridge applications. This driver features strong 3A source, 4A sink drivers with very fast 15ns typical propagation delay and 2ns typical delay matching, making it optimal for high-frequency switching applications. VDD and boot UVLO protects against an undervoltage operation. The HIP2210 is offered in a 10 Ld 4x4mm TDFN package. Applications includes telecom half-bridge and full-bridge DC/DC converters, 3-phase BLDC motor driver, H-bridge motor driver, two-switch forward and active clamp converter, multiphase PWM DC/DC controllers and class-D amplifiers.

• 115VDC bootstrap supply maximum voltage supports 100V on the half-bridge
• Fast propagation delay and matching: 15ns typical delay
• Integrated 0.5ohm typical bootstrap diode
• Wide 6V to 18V operating voltage range
• VDD and boot undervoltage lockout (UVLO)
• Robust noise tolerance: wide hysteresis at inputs, HS pin tolerates up to -10V continuous
• Tri-Level PWM input with logic threshold levels set by external VREF pin from 2.7V to 5.5V
• Programmable dead time prevents shoot-through