Микросхемы и комплектующие UMFT260EV1A

Оценочная плата , модуль USB - UART/I2C класса HID, подключается к 24-контактному гнезду DIP

The UMFT260EV1A is a development module for FTDI's FT260 HID class USB to UART/I2C bridge IC. The FT260 is a single chip USB to UART/I2C bridge with standard human interface device (HID) class support. The HID class USB to UART/I2C module is ideal for development purposes to quickly prove functionality of adding USB to a target design. The UMFT260EV1A is a module which is designed to plug into a standard 0.8" wide 24 pin DIP socket. An On-board Micro USB-B type connector allows modules to be connected to a host system via a standard USB A to Micro B cable. Many of the features of FT260 can be utilized with this module.

• USB2.0 compliant full speed device with entire USB protocol handled on the chip
• Support 2 USB HID interfaces, each corresponding to the on-chip physical interfaces, I2C and UART
• Pin configuration of enabling HID interface for variety of application
• HID over I2C specification support
• On-board I2C 2kbits EEPROM to contain FT260 configuration settings and vendor specific parameters
• Jumpers for selecting the FT260 HID interfaces configuration
• Solder jumpers for configuring the FT260Q to be in USB bus powered or self powered modes

Области применения

Связь и Сеть