Микросхемы и комплектующие FT233HPQ-TRAY

Интерфейсные мосты , USB to UART/FIFO, 1.08 В, 1.32 В, QFN, 64 вывод(-ов), -40 °C

FT233HP is a hi-speed USB device with Type-C/PD 3.0 controller IC that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 1 independent channel compatible with the FT232H single hi-speed USB to multipurpose UART/FIFO solution. 2 USB PD 3.0 port support. Port 1 supports dual role swap function while port 2 supports sink mode with charging function through to port 1. Supports a proprietary half duplex FT1248 interface with a configurable width, bi-directional data bus (1, 2, 4 or 8 bits wide). UART Interface supports 7/8 bit data, 1/2 stop bits, and odd/even/mark/space/no parity. It features asynchronous serial UART interface option with full hardware handshaking and modem interface signals and fully assisted hardware or X-On / X-Off software handshaking.

• Compact 64-pin Lead Free QFN package, supports 2 PD 3.0 port
• Supports PD Specification 3.0
• Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source
• Type-C/PD physical layer protocol, up to 8 configurable PD GPIO pins support
• CPU-style FIFO interface mode simplifies CPU interface design
• Single channel USB to serial / parallel ports with a variety of configurations
• Low operating and USB suspend current
• Auto-transmit enable control for RS485 serial applications using the TXDEN pin
• USB 2.0 hi-speed (480Mbits/second) and full speed (12Mbits/second) compatible
• UHCI/OHCI/EHCI host controller compatible