Микроконтроллеры широкого назначения ATMEGA162V-8PU

MCU , 8BIT, ATMEGA, 8MHZ, DIP-40

The ATMEGA162V-8PU is a high-performance, low-power 8-bit AVR RISC-based Microcontroller combines 16kB of programmable flash memory, 1kB SRAM, 512byte EEPROM and a JTAG interface for on-chip debugging. The device supports throughput of 16MIPS at 16MHz and operates between 2.7 to 5.5V. By executing instructions in a single clock cycle, the device achieves throughputs approaching 1MIPS per MHz, balancing power consumption and processing speed. The device is manufactured using the high-density non-volatile memory technology. The on-chip ISP flash allows the program memory to be reprogrammed in-system through an SPI serial interface, by a conventional non-volatile memory programmer, or by an on-chip boot program running on the AVR core. The boot program can use any interface to download the application program in the application flash memory.

• Advanced RISC architecture
• Power-on reset and programmable brown-out detection
• Internal calibrated RC oscillator
• External and internal interrupt sources
• Six sleep modes - idle, ADC noise reduction, power-save, power-down, standby and extended standby
• 131 powerful instructions-most single clock cycle execution
• 32 x 8 general purpose working registers
• Fully static operation
• Up to 16MIPS throughput at 16MHz
• On-chip 2-cycle multiplier

• JTAG (IEEE std. 1149.1 compliant) interface
• Two 8-bit timers
• counters with separate prescalers and compare modes
• Two 16-bit timers
• counters with separate prescalers, Compare modes and Capture modes
• Real-time counter with separate oscillator
• Six PWM channels
• Dual programmable serial USARTs
• Serial peripheral interface (SPI)
• Programmable watchdog timer with separate on-chip oscillator
• On-chip analogue comparator

Области применения

Промышленное