Микроконтроллеры ARM ATSAM4N16CA-AU

Микроконтроллер ARM , серия SAM4N, SAM32 Family SAM 4N Series Microcontrollers, ARM Cortex-M4

The ATSAM4N16CA-AU is a SMART SAM4N series 32-bit Flash Microcontroller based on the high-performance ARM Cortex-M4 RISC processor. It operates at a maximum speed of 100MHz and features 1MB of flash memory and 80kB of SRAM. Peripherals include seven USARTs, four SPIs and three I²Cs for fast serial communication, as well as a 16-channel 12-bit ADC, a 10-bit DAC, PWM, timers and RTC. The device operates from 1.62 to 3.6V. It is a medium range general purpose microcontroller with the best ratio in terms of reduced power consumption, processing power and peripheral set.

• ARM Cortex-M4 running at up to 100MHz
• Memory protection unit (MPU)
• Thumb®-2 instruction set
• Embedded voltage regulator for single supply operation
• Power-on-reset (POR), brown-out detector (BOD) and watchdog for safe operation
• 3 to 20MHz Resonator oscillators
• High precision factory trimmed internal RC oscillator with 4MHz default frequency
• Slow clock internal RC oscillator as permanent low-power mode device clock
• PLL up to 240MHz for device clock
• Temperature sensor

• Sleep, wait and backup modes
• Two 3-channel 16-bit timer counter blocks with capture, waveform, compare and PWM mode
• One 4-channel 16-bit PWM
• 32-bit low-power RTT and low-power RTC with calendar and alarm
• 256-bit General purpose backup registers (GPBR)
• Up to 3 USARTs with ISO7816, IrDA (only USART0), RS-485 and SPI mode
• Up to 4 two-wire UARTs
• Up to 3 two-wire interfaces (TWI)
• 1 SPI interface
• Three 32-bit parallel input
• output controllers

Области применения

Измерительное, Потребительская Электроника, Автоматизация Зданий, Автоматизация и Управление Процессами