Контроллеры и драйверы двигателей / движения / зажигания DRV8811PWP

Контроллер/привод двигателя , шаговый, 8В до 38В питание, 1Ом RDS, 24В/2.5А/2 выхода, HTSSOP-28

The DRV8811PWP is a 1.9A Bipolar Stepper Motor Driver with on-chip 1/8 microstepping indexer (step/Dir Ctrl), provides an integrated stepper motor driver solution for printers, scanners and other automated equipment applications. The device has two H-bridge drivers, as well as microstepping indexer logic to control a stepper motor. The output driver block consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings. A simple STEP/DIR interface allows easy interfacing to controller circuits. Step mode pins allow for configuration of the motor in full-step, half-step, quarter-step or eighth-step modes. Decay mode and PWM off time are programmable. Internal shutdown functions are provided for over-current protection, short circuit protection, under-voltage lockout and over-temperature. Supports VM under-voltage lockout (UVLO), over-current protection (OCP), thermal shutdown (TSD) and fault condition indication pin (nFAULT) protection.

• Pulse width modulation (PWM) micro stepping motor driver
• Built-in micro stepping indexer
• Up to 1/8 micro stepping
• Step and direction control
• Programmable mixed decay, blanking and off-time
• Up to 1.9A current per winding
• Low 1.0R (HS+LS) MOSFET RDS (ON) (25°C)
• 8 to 38V Operating supply voltage range
• Pin to pin with DRV8818
• Green product and no Sb/Br

Области применения

Компьютеры и Периферия, Автоматизация и Управление Процессами, Промышленное, Робототехника, Привод Двигателя и Управление Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.