Контроллеры и драйверы двигателей / движения / зажигания DRV8303DCA .

Контроллер/привод двигателя , 3-фазный DC бесщеточный, 6В до 60В питание, 3 выхода, HTSSOP-48

The DRV8303DCA is a 3-phase Pre-Driver with dual current shunt amplifiers. It provides three half bridge drivers, each capable of driving two N-channel MOSFETs. It supports up to 1.7A source and 2.3A peak current capability. It can operate off of a single power supply with a wide range from 6 to 60V. It uses a bootstrap gate driver architecture with trickle charge circuitry to support 100% duty cycle. It uses automatic hand shaking when the high-side or low-side MOSFET is switching to prevent current shoot through. Integrated VDS sensing of the high and low-side MOSFETs is used to protect the external power stage against overcurrent conditions. The DRV8303 includes two current shunt amplifiers for accurate current measurement. The amplifiers support bi-directional current sensing and provide and adjustable output offset up to 3V.

• Slew rate control for EMI reduction
• Bootstrap gate driver with 100% duty cycle support
• Dual integrated current shunt amplifiers with adjustable gain and offset
• SPI interface
• Programmable dead time control (DTC) protection
• Programmable overcurrent protection (OCP)
• PVDD and GVDD under-voltage lockout (UVLO) protection
• GVDD over-voltage lockout (OVLO) protection
• Over-temperature warning/shutdown (OTW/OTS) protection
• Reported through nFAULT, nOCTW and SPI registers protection

• 6 or 3 PWM input modes
• 3.3 and 5V Interface support
• Green product and no Sb/Br

Области применения

Привод Двигателя и Управление, Робототехника, Промышленное