ИС интерфейса LVDS SN65LVDS179MDGKREP

Дифференциальный драйвер линии , 2 драйвер(-ов)

The SN65LVDS179MDGKREP is a high-speed differential Line Driver and Receiver uses low-voltage differential signaling (LVDS) to achieve signaling rates as high as 400Mbps. The TIA/EIA-644 standard compliant electrical interface provides a minimum differential output voltage magnitude of 247mV into a 100R load and receipt of 100mV signals with up to 1V of ground potential difference between a transmitter and receiver. The intended application of this device and signaling technique is for point-to-point baseband data transmission over controlled impedance media of approximately 100R characteristic impedance. The transmission media may be printed circuit board traces, backplanes or cables.

• Receiver has open-circuit failsafe design
• Controlled baseline - One assembly/test site, one fabrication site
• Enhanced diminishing manufacturing sources (DMS) support
• Enhanced product-change notification
• Qualification pedigree
• Bus-terminal ESD exceeds 12kV
• Operates from a single 3.3V supply
• Low-voltage differential signaling with typical output voltage of 350mV and a 100R load
• Propagation delay time - 1.7ns Typical driver and 3.7ns typical receiver
• Power dissipation at 200MHz - 25mW Typical driver and 60mW typical receiver

• LVTTL input levels are 5V tolerant
• Receiver maintains high input impedance with VCC<1.5V
• Green product and no Sb/Br

Области применения

Обработка Сигнала, Промышленное