ИС для интерфейса CAN MCZ33905CS3EK

IC , SBC, HS CAN, 3.3V, 32SOIC

The MCZ33905CS3EK is a second generation System Basis Chip, combining advanced power management unit for the MCU, the integrated CAN interface and for the additional ICs such as sensors, CAN transceiver. - Built in enhanced high speed CAN interface (ISO11898- 2 and -5), with local and bus failure diagnostic, protection and fail-safe operation mode. - Built in LIN interface, compliant to LIN 2.1 and J2602-2 specification, with local and bus failure diagnostic and protection. - Innovative hardware configurable fail-safe state machine solution. - Multiple LP modes, with low current consumption. - Family concept with pin compatibility, with and without LIN interface device. This device is powered by SMARTMOS technology. This device implements multiple Low-power (LP) modes, with very low-current consumption. In addition, the device is part of a family concept where pin-compatibility adds versatility to module design.

• Voltage, current and temperature protection
• Extremely low quiescent current in LP modes
• Fully-protected embedded 5V regulator for the CAN driver
• Multiple undervoltage detections to address various MCU specifications and system operation modes
• Auxiliary 5 or 3.3V SPI configurable regulator, with overcurrent detection
• undervoltage protection
• MUX output pin for device internal analog signal monitoring and power supply monitoring
• Advanced SPI, MCU, ECU power supply and critical pins diagnostics and monitoring
• ISO11898-5 high-speed CAN interface compatibility for baud rates of 40kb
• s to 1.0Mb

• s
• Scalable devices ranging from 0 to 2 LINs which are compatible to J2602-2 and LIN 2.1

Области применения

Авто, Промышленное, Робототехника, Привод Двигателя и Управление, Оборона, Военная и Авиационно-космическое, Сельское Хозяйство