Интерфейсные элементы - Расширительные модули ввода-вывода PCAL9539APW,118

Расширитель I/O , 16бит, 400 кГц, I2C, 1.65 В, 5.5 В, TSSOP

The PCAL9539APW,118 is a 16-bit Input/output (GPIO) Expander with interrupt and reset for I²C-bus/SMBus applications. The NXP I/O expander provides a simple solution when additional I/Os are needed while keeping interconnections to a minimum. In addition to providing a flexible set of GPIOs, the wide VDD range of 1.65 to 5.5V allows the PCAL9539A to interface with next-generation microprocessors and microcontrollers where supply levels are dropping down to conserve power. The expander contains the PCA9539 register set of four pairs of 8-bit configuration, input, output and polarity inversion registers and additionally, the PCAL9539A has Agile I/O, which are additional features specifically designed to enhance the I/O. The additional features includes programmable output drive strength, latchable inputs, programmable pull-up/pull-down resistors, maskable interrupt, interrupt status register, programmable open-drain or push-pull outputs.

• Low standby current consumption
• Schmitt-trigger action allows slow input transition and better switching noise immunity
• Open-drain active LOW interrupt output (INT)\
• Internal power-ON reset
• Power-up with all channels configured as inputs
• No glitch on power-up
• Latched outputs with 25mA drive maximum capability for directly driving LEDs
• Latch-up performance exceeds 100 mA per JESD 78, class II
• Bank selectable push-pull or open-drain output stages
• Read-only register identifies the source of an interrupt

• Input port register values changes are kept until the input port register is read
• Floating input or pull-up
• pull-down resistor enable
• Mask prevents the generation of the interrupt when input changes state
• 100kR Pull-up
• down resistor

Области применения

Связь и Сеть, Считывание и Контрольно-измерительная Аппаратура, Управление Питанием