Интерфейс RS-232 MAX563CWN+

Приемопередатчик RS232 , 3В-3.6В питание, 2 драйвера, WSOIC-18

The MAX563CWN+ is a 3.3V powered, EIA/TIA-562 dual transceiver with receivers active in shutdown mode in 18 pin WSOIC package. It implements EIA/TIA-562 standard and communicates with RS232 transceivers, yet consumes far less power. This feature makes the device ideal for battery powered, hand held computers. The MAX563 provides 116Kbps data rate while maintaining ±3.7V EIA/TIA-562 signal levels which makes it compatible with LapLink software. An on-board charge pump converts 3.3V supply to ±6.6V needed to produce the EIA/TIA-562 output voltage levels. The receivers remain active to continuously monitor signals from external devices when charge pumps and transmitters are shut down to save power (for example-ring indicator from modems). The two receiver's outputs can be enabled and disabled independently of shutdown function to allow two ports generally of different types to be wire-OR connected at the UART.

• Supply voltage range from 3V to 3.6V
• Operating temperature range from 0°C to 70°C
• Provides interoperability with RS232
• Two EIA
• TIA-562 drivers and two EIA
• TIA-562 receivers
• Low power shutdown mode with 10µA maximum shutdown current
• Three state TTL
• CMOS receiver outputs
• VCC supply current of 3mA (no load) and 8mA (RL = 3Kohm on both outputs, inputs static)

• Transition slew rate of 6V
• µs
• Requires four 0.1µF charge pump capacitors and bypass capacitor of similar size

Области применения

Связь и Сеть, Переносные Устройства, Потребительская Электроника