Интерфейс RS-232 MAX3222EIPWG4

Приемопередатчик RS232 , 2 драйвера, 3В-5.5В, TSSOP-20

The MAX3222EIPWG4 is a RS-232 multichannel Line Driver/Receiver consists of two line drivers, two line receivers and a dual charge-pump circuit. It has ±15kV ESD protection pin-to-pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3 to 5.5V supply. The device operates at typical data signalling rates up to 500kbps and a maximum of 30V/µs driver output slew rate. It can be placed in the power-down mode by setting the power-down (PWRDOWN) input low, which draws only 1µA from the power supply. When the device is powered down, the receivers remain active while the drivers are placed in the high-impedance state. Also, during power-down, the onboard charge pump is disabled, V+ is lowered to VCC and V- is raised toward GND.

• Alternative high-speed pin-compatible device (1Mbps) for SNx5C3222E
• 1µA Typical Low standby current
• 4 x 0.1µF External capacitors
• Green product and no Sb/Br

Области применения

Переносные Устройства, Компьютеры и Периферия