Интерфейс CAN SN65HVD233DG4

CAN шина , CAN, 1, 1, 3 В, 3.6 В, SOIC

The SN65HVD233DG4 is a CAN (Controller Area Network) transceiver with standby and loopback mode in 8 pin SOIC package. This CAN transceiver is used in applications employing CAN serial communication physical layer in accordance with the ISO 11898-2 standard. The SN65HVD233 provides transmit and receive capability between differential CAN bus and CAN controller with signalling rates up to 1Mbps. The SN65HVD233 features cross wire protection, overvoltage protection up to ±36V, loss of ground protection, overtemperature (thermal shutdown) protection and common mode transient protection of ±100V. The device operates over a wide -7V to 12V common mode range. The SN65HVD233 enter a low current standby mode during which the driver is switched off and receiver remains active if a high logic level is applied to the RS pin. A logic high on loopback (LBK) pin (pin 5) of SN65HVD233 places bus output and bus input in a high impedance state.

• Single 3.3V supply voltage
• Bus pins fault protection exceeds ±36V
• Bus pin ESD protection exceeds ±16KV HBM
• GIFT/ICT compliant
• High input impedance allows for 120 nodes
• Adjustable driver transition times for improved emissions performance
• Unpowered node does not disturb bus
• Low current standby mode of typically 200µA
• Operating temperature range -40°C to 125°C
• LVTTL I/Os are 5V tolerant

Области применения

Авто, Промышленное, Автоматизация и Управление Процессами, Считывание и Контрольно-измерительная Аппаратура, Привод Двигателя и Управление, Робототехника, Связь и Сеть This device has limited built-in ESD protection. The leads should be shorted together or device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.