Импульсные источники питания LCB150N

Источник питания AC/DC в корпусе , ITE, 1 выход(-ов), 150 Вт, 15 В, 10 А

Импульсные источники питания 150W 15V 10A

The LCB150N from Artesyn Embedded Technologies is a 150W single output power supply. It is approved by UL 60950-1, cUL 60950-1, TUV 60950-1and CE standards. The inrush current is 50A (cold start at 25°C) at 230VAC, input current is 3A at 115VAC. Hold up time is greater than >25ms and leakage current is less than 2mA at 264VAC. This power supply has 90W to 158.4W rated load (derate linear to 50% from 50°C to 70°C), 100mV to 200mVp-p output noise (PARD) (main output, measured with a 0.1µF ceramic and 10µF tantalum capacitor on any output, 20MHz). It features short circuit protection (bounce mode), greater than 110% rated output power overload protection (OCP), 115% to 150% overvoltage protection (OVP).

• Input range from 88VAC to 132VAC, 176VAC to 264VAC (by switch), 248VDC to 373VDC
• Frequency range from 47Hz to 63Hz, nominal 50Hz/60Hz
• 15V output voltage, 10A output current, ±10% Vo adjust, 150W output power, 89% efficiency
• Low cost, output voltage adjust is ±10%
• Power ON with LED indicator, withstand 2G vibration test, output voltage overshoot
• EN61000-3-2: 2000 Class A, EN61000-3-3: 1995+A1:2001 harmonics
• PRI-chassis 1500VAC, PRI-SEC 3000VAC, SEC-chassis 500VAC isolation
• Dimension is 3.9inch x 7inch x 1.5inch
• Operating temperature range from -25°C to 70°C, linear derating to 50% from 50°C to 70°C

Области применения

Промышленное