Формирователи импульса сброса UCC2946PW

Схема контроля напряжения , выход сброса с активным низким, 2.1В-5.5В (Vin), TSSOP-8

The UCC2946PW is a Microprocessor Supervisor with active-low push-pull output. It is designed to provide accurate microprocessor supervision, including reset and watchdog functions. During power up, the device asserts a reset signal RES with VDD as low as 1 V. The reset signal remains asserted until the VDD voltage rises and remains above the reset threshold for the reset period. Both reset threshold and reset period are programmable by the user. The UCCx946 is also resistant to glitches on the VDD line. Once RES has been de-asserted, any drops below the threshold voltage need to be of certain time duration and voltage magnitude to generate a reset signal. An I/O line of the microprocessor may be tied to the watchdog input (WDI) for watchdog functions. If the I/O line is not toggled within a set watchdog period, programmable by the user, WDO is asserted. The watchdog function is disabled during reset conditions.

• Fully programmable reset threshold
• Fully programmable reset period
• Fully programmable watchdog period
• Programmable time delay
• Input voltage down to 2V
• Input 18µA maximum input current
• Reset valid down to 1 V
• 2% Accurate reset threshold
• Green product and no Sb/Br

Области применения

Управление Питанием