Формирователи импульса сброса MAX708RCSA+

Схема контроля микропроцессора , 1В-5.5В питание, выход сброса с активным высоким/низким

The MAX708RCSA+ is a +3V voltage monitoring low cost microprocessor (µP) supervisory circuit in 8 pin NSOIC package. This supervisory circuit reduces the complexity and number of components required to monitor +3V power supply levels in +3V to +5V µP systems. It significantly improves system reliability and accuracy compared to separate ICs or discrete components. This device provides reset output during power-up, power-down and brown-out conditions. The MAX708R provides 1.25V threshold detector for power fail warning, low battery detection or for monitoring power supply other than main supply. It also provides active-low manual reset input. This device is used in computers, controllers, intelligent instruments, critical µP power monitoring and battery powered equipments.

• Supply voltage range from 1V to 5.5V
• Operating temperature range from 0°C to 70°C
• Active-high, push-pull
• active-low, push-pull reset output signal
• Reset threshold of 2.63V and reset time delay of 200ms
• Debounced TTL
• CMOS compatible manual reset input
• Quiescent current of 100µA
• Supply current of 50µA at VCC < 3.6V

Области применения

Мониторинг Системы, Переносные Устройства