Формирователи импульса сброса MAX6381XR27D3+T

Схема контроля , активный низкий, двухтактный, 1В - 5.5В, 2.7В порог, 140мс задержка, SC-70-3

The MAX6381XR27D3+T from Maxim Integrated Products is a low voltage, low power microprocessor (µP) reset circuit in 3 pin SC-70 package. This microprocessor (µP) supervisory circuit monitors power supply voltage ranging from +1.8V to +5V while consuming only 3µA of supply current at +1.8V. Whenever VCC falls below the factory-set reset thresholds, the reset output asserts and remains asserted for a minimum reset timeout period after VCC rises above the reset threshold. It has a push-pull active-low reset output. Typical application includes controllers, dual voltage systems, intelligent instruments, critical microprocessor (µP) and microcontroller (µC) power monitoring and battery powered equipment.

• Supply voltage range is 1V to 5.5V
• Operating temperature range from -40°C to 125°C
• Reset threshold voltage is 2.56V (min), 2.63V (nom) and 2.69V (max)
• Reset threshold accuracy is ±2.5%
• Reset timeout delay is 140ms (min) and 280ms (max)
• Reset output state is valid to VCC = 1V
• Negative going VCC transient immunity
• Low power consumption of 6µA at +3.6V and 3µA at +1.8V
• Negative going VCC transient immunity
• Computers; Controllers; Critical µP and µC Power Monitoring; Dual Voltage Systems; Intelligent Instruments; Portable Battery-Powered Equipment

Области применения

Мониторинг Системы, Переносные Устройства