Формирователи импульса сброса MAX6315US26D1+T

Схема контроля микропроцессора , 1В-5.5В питание, выход сброса с активным низким, с открытым стоком

The MAX6315US26D1+T is a low power, open drain CMOS microprocessor (µP) reset circuit in 4 pin SOT-143 package. This supervisory circuit is designed to monitor power supplies in µP and digital systems. It provides excellent circuit reliability and low cost by eliminating external components and adjustments. The MAX6315 also provides a debounced manual reset input. This device performs a single function that is it asserts a reset signal whenever VCC supply voltage falls below preset threshold or whenever manual reset is asserted. Reset remains asserted for an internally programmed interval (reset timeout period) after VCC has risen above the reset threshold or manual reset is deasserted. The open drain complementary RESET output of MAX6315 can be pulled-up to a voltage higher than VCC. It is used in computers, controllers, intelligent instruments, critical µP and µC power monitoring and battery powered equipment.

• Supply voltage range from 1V to 5.5V
• Operating temperature range from -40°C to 125°C
• Ensures reliable system operation with minimal power consumption
• Immune to short VCC transients
• Pin compatible with MAX811 device
• VCC supply current of 5µA (VCC = 5.5V, no load, -40°C to +85°C)
• Reset timeout period of 2.4ms and threshold voltage of 2.63V

Области применения

Мониторинг Системы, Переносные Устройства