Дочерние и отладочные платы MA180029

Демонстрационная плата , микроконтроллер PIC18F47J53, вставной модуль USB HS 2.0

The PIC18F47J53 FS USB PIM Demo Board is a full-speed USB demonstration and development board featuring the PIC18F47J53 with XLP low power. The board can be operated either standalone or as a Plug-In Module (PIM) plugged into the PIC18 Explorer Board.

• Two miniature SMT red LEDs
• 12MHz SMT crystal which can be used with internal PLL to run the microcontroller and USB module
• MCP9701A Analogue output temperature sensor
• General purpose push button S2 connected through with a pull-up resistor
• Six-pin, right-angle in-circuit serial programming (ICSP ) programmer
• debug header
• Jumpers for current measurement (JP3) and configuration (JP2)
• A mini-B USB connector for power and communication
• Full-speed (12 Mbps) and low-speed (1.5 Mbps) operation
• Support of control, interrupt, bulk and isochronous transfers

• Support of up to 32 endpoints, 3.8Kbytes of dual access RAM for USB or general purpose use

Области применения

Встроенные Конструкции и Разработка, Промышленное, Медицинское, Авто, Связь и Сеть

Содержание

PIC18F4XJ5X full-speed USB demonstration-board, standard USB A to mini-B cable, six-pin, in-line ICSP to RJ-11 programming adapter board, PICDEM starter kit CD-ROM, containing USB firmware projects..Etc