Дифференциальные усилители MAX9626ATC+T

Дифференциальный усилитель , 1 усилитель(-ей), 2 мВ, 1.15 ГГц, -40 °C, 125 °C

The MAX9626ATC+T from Maxim Integrated Products is a 1.35GHz fully differential amplifier in 12 pin TQFN package. It is a low-noise, low distortion and high-bandwidth differential amplifier/ADC driver for use in applications from DC to 1.35GHz. The exceptional low input-referred noise and low distortion make this part an excellent solution to drive high-speed 12bit to 16bit pipeline ADCs. The output common mode is set through the VOCM input pin, thus eliminating the need for a coupling transformer or AC-coupling capacitors. It is used in communication, medical imaging, ATE and high-performance instrumentation.

• Single supply voltage range from +2.85V to +5.25V
• Low voltage noise density is 5.7nV
• √Hz, noise figure is 22.2dB
• Low harmonic distortion HD2
• HD3 of -98
• -103dB at 10MHz, HD2
• HD3 of -80
• -80dB at 125MHz
• 1V
• V factory set gain, input offset voltage is 2mV

• Adjustable output common-mode voltage
• Differential to differential or single ended to differential operation
• 25µA shutdown current, 3dB large signal bandwidth is 1150MHz, slew rate is 6500V
• Fs
• Power-supply rejection ratio is 89dB (VVCOM = VCC
• 2, 2.85V
• Gain error is ±0.2%, common-mode rejection ratio is 62dB
• Operating temperature range from -40°C to 125°C

Области применения

Обработка Сигнала, Связь и Сеть, Медицинское, Считывание и Контрольно-измерительная Аппаратура