Буферы и линейные аппаратные драйверы MAX4448ESE+

Несимметричный в дифференциальный драйвер линии , полоса пропускания 330МГц, 4.5В до 5.5В, NSOIC-16

The MAX4448ESE+ is a 4300V/µs, wideband, high output current, single ended to differential line driver in 16 pin NSOIC package. The single ended-to differential line driver is designed for high speed communications. Using current feedback for greater bandwidth, this device deliver full-power bandwidth of 310MHz and feature slew rates as high as 4300V/µs. The MAX4448 has small signal bandwidth of 330MHz and internally compensated for minimum gain configurations of +2V/V. For greater design flexibility, the MAX4448 allow for variable gain selection using external gain-setting resistors. A low power enable mode reduces current consumption below 5.5mA and places the outputs in a high impedance state. The MAX4448 can deliver differential output swings of ±6.2V from ±5V supplies with a 50 ohm load. Excellent differential gain/phase and noise specifications make this amplifier ideal for a wide variety of video and RF signal-processing and transmission applications.

• Supply voltage range is 4.5V to 5.5V
• Operating temperature range from -40°C to 85°C
• Output drive current is 130mA
• Spurious free dynamic range is -78dBc at 100KHz
• Low differential gain
• phase is 0.01%
• 0.02°
• Ultra low noise of 23nV
• √Hz at fIN = 1MHz
• Settling time is 8ns

Области применения

Связь и Сеть, Обработка Сигнала