Аналого-цифровые преобразователи (АЦП) MAX1362EUB+

АЦП , 10 бит, 150 Квыборок/с, Дифференциальный, Несимметричный, I2C, Однополярный, 4.5 В

The MAX1362EUB+ is a 4-channel, 10bit, system monitor with programmable trip window and SMBus alert response in 10 pin µMAX package. It features a digitally programmable window comparator with an interrupt output for automatic system-monitoring applications. Once configured, monitor mode automatically asserts an interrupt when any analogue input exceeds the programmed upper or lower thresholds, without interaction to the host. The MAX1362 respond to the SMBus alert, allowing quick identification of the alarming device on a shared interrupt. A programmable delay between monitoring intervals lowers power consumption at reduced monitoring rates. It integrates an internal voltage reference, a clock & a 1.7MHz high-speed I2C-compatible 2-wire serial interface. The optimized interface allows a maximum conversion rate of 94.4Ksps in normal mode. Two scan modes utilize on-chip RAM to allow eight conversions of a selected channel or scanning of a group of channels to reduce interface overhe

• Supply voltage range is 4.5V to 5.5V
• Operating temperature range from -40°C to 85°C
• Internal reference is 4.096V
• Supply current is 436µA at 150Ksps in monitor mode and 670µA at 94.4Ksps
• AutoShutdown power down reducing supply current to less than 0.5µA when idle
• Full scale analogue i
• p range is determined by internal reference
• by external reference of 1V to VDD
• 10bit I2C compatible ADC ±1LSB INL, ±1LSB DNL
• 4-channel single ended or 2-channel fully differential inputs

• Software programmable bipolar
• unipolar conversions

Области применения

Обработка Сигнала, Мониторинг Системы